Code: Select all
@sys$manager:tcpip$config
Code: Select all
$ DEFINE/SYSTEM TCPIP$SMTP_RECV_TRACE 1
$ DEFINE/SYSTEM TCPIP$SMTP_LOG_LEVEL 2
Code: Select all
$ MAIL
MAIL> SEND
To: destination_user@destination_host
Code: Select all
$ type/tail TCPIP$SMTP_COMMON:TCPIP$SMTP_<machine>.LOG
Code: Select all
$!
$! Site defined SMTP options file.
$!
$! This file should be in :
$! SYS$STARTUP:TCPIP$SMTP_SYSTARTUP.COM
$!
$! This includes logical names documented in the TCPIP 5.1 manual
$! as well as one addition documented in the 5.3 release notes.
$!
$! By default, all commands are commented out. Only uncoment the ones
$! you need.
$!
$! TCPIP$SMTP_LOG_LEVEL value
$! Writes diagnostic information to the log file.
$!
$! 2 Enables logging of all information when the symbiont starts up.
$! The Next Open File message is printed, giving the name of each
$! control file before processing begins. All mail headers and mail
$! recipients in a control file are logged after control file
$! processing is complete.
$!
$! 3 Provides additional information about symbiont initialization and
$! activity during control file processing.
$!
$! 5 Enables full symbiont diagnostics. For use only under the advice
$! of <company> customer support.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_LOG_LEVEL 2
$!
$!---------------
$!
$!
$! TCPIP$SMTP_NOSEY
$! Used with TCPIP$SMTP_LOG_LEVEL to print the full subject RFC
$! headers information. If not defined, the header is logged as
$! SUBJECT:<omitted>.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_NOSEY 1
$!
$!---------------
$!
$!
$! TCPIP$SMTP_LOG_LINE_NUMBERS
$! Writes line numbers to SMTP logs. Includes the symbiont,
$! receiver, and MAIL$PROTOCOL (DEBUG.TXT) logs.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_LOG_LINE_NUMBERS 1
$!
$!---------------
$!
$! TCPIP$SMTP_SYMB_TRACE
$! Logs all messages received from and transmitted to remote SMTP
$! servers. Used to trace the SMTP application layer protocol. Any
$! nonprinting characters or control characters that are sent or
$! received are printed as \n, where n is the hexadecimal value of
$! the character. For example, command lines and replies are
$! terminated with a <CR><LF> that appear in the log file as
$! follows:
$!
$! send buf=MAIL FROM:<jones@acme.com>\d\a
$! recv buf=250 <jones@acme.com>... Sender OK\d\a
$! In this message, \d\a is the <CR><LF>.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_SYMB_TRACE 1
$!
$!----------------
$!
$! TCPIP$SMTP_RECV_TRACE
$! Logs all messages received from and transmitted to remote SMTP
$! clients. Used to trace the SMTP application layer protocol. The
$! same conventions for logging nonprinting characters or control
$! characters are used. The logical name UCX$SMTP_PROTO_TRACE is
$! obsolete.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_RECV_TRACE 1
$!
$!----------------
$!
$! TCPIP$SMTP_RECV_DEBUG
$! Logs full diagnostics, similar to the TCPIP$SMTP_LOG_LEVEL 5
$! logical name. Obsoletes the logical name TCPIP$SMTP_PROTO_DEBUG.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_RECV_DEBUG 1
$!
$!----------------
$!
$!
$! TCPIP$SMTP_VMSMAIL_SEND
$! Instructs the MAIL$PROTOCOL process to log diagnostics to a file
$! named DEBUG.TXT in the default directory. (Used primarily by
$! <company>.)
$!
$!DEFINE/SYSTEM TCPIP$SMTP_VMSMAIL_SEND 1
$!
$!----------------
$!
$!
$! TCPIP$SMTP_VMSMAIL_PARSE
$!
$! Causes the SMTP address parsing code to log diagnostics. The
$! symbiont, receiver, and MAIL$PROTOCOL code are sensitive to this
$! logical name, which is used primarily by <company>.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_VMSMAIL_PARSE 1
$!
$!----------------
$!
$! TCPIP$SMTP_SYMB_SNAPSHOT_BLOCKS n
$! Enables snapshot logging for the symbiont. The value you assign
$! (n) specifies the size of the snapshot buffer in OpenVMS blocks
$! (1 block being 512 bytes).
$!
$! Use with TCPIP$SMTP_LOG_LEVEL.
$!
$! When you enable snapshot buffering for the symbiont, it takes
$! some time for the symbiont process to stop when you enter a TCPIP
$! STOP MAIL command or you stop the queue. The delay depends on the
$! size of the snapshot buffer and the speed of the system and its
$! disks.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_SYMB_SNAPSHOT_BLOCKS 200
$!
$!----------------
$!
$! TCPIP$SMTP_RECV_SNAPSHOT_BLOCKS n
$! Enables snapshot logging for the receiver. The value you assign
$! (n) specifies the size of the snapshot buffer in OpenVMS blocks
$! (1 block being 512 bytes). Use with TCPIP$SMTP_LOG_LEVEL. For
$! example, the following command line sets all of the receiver
$! diagnostics on and enables snapshot logging for the receiver with
$! a snapshot buffer of 200 blocks:
$!
$!DEFINE TCPIP$SMTP_RECV_SNAPSHOT_BLOCKS 200
$!
$!----------------
$!
$! TCPIP$SMTP_NO_SUBS_DOMAIN_INBOUND
$! Instructs SMTP not to consider mail that is sent to the
$! substitute domain as local mail. By default, SMTP recognizes mail
$! that is addressed to the substitute domain as local mail.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_NO_SUBS_DOMAIN_INBOUND 1
$!
$!---------------
$!
$! TCPIP$SMTP_COMMON common-directory
$! Specifies the default cluster common directory. By default, SMTP
$! looks for distribution list (.DIS) and local alias
$! (TCPIP$SMTP_LOCAL_ALIASES.TXT) files in the
$! SYS$SPECIFIC:[TCPIP$SMTP].
$!
$! You must:
$!
$! Define this logical name before SMTP startup. Create the
$! directory with read (R) and write (W) access. Move the .DIS or
$! .TXT file, or both, to the directory. You can also use this
$! logical name as a search list.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_COMMON SYS$SPECIFIC:[TCPIP$SMTP]
$!
$!---------------
$!
$! TCPIP$SMTP_JACKET_LOCAL
$! Instructs the symbiont to put the SMTP jacket on local-to-local
$! mail to provide sufficient information to the POP server.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_JACKET_LOCAL 1
$!
$!---------------
$!
$! TCPIP$SMTP_INBOUND_NOXVMS
$! Instructs the symbiont not to use the RFC X-VMS-To header as the
$! text of the OpenVMS Mail To: header and the X-VMS-CC header as
$! the text of the CC: line. Instead, the RFC To: and CC: headers
$! are used. If the TCPIP$SMTP_ INBOUND_NOXVMS option is not
$! defined, the SMTP symbiont uses the text of the X-VMS-To and
$! X-VMS-CC headers for the mail header lines.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_INBOUND_NOXVMS 1
$!
$!
$!---------------
$!
$! TCPIP$SMTP_VMSDEF_TO
$! Instructs the symbiont not to pass any text for the To: line to
$! OpenVMS callable mail when delivering local mail. This option
$! causes OpenVMS callable mail to use the default text for the To:
$! line (the user name). Overrides the TCPIP$SMTP_INBOUND_NOXVMS
$! option for the To: field.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_VMSDEF_TO 1
$!
$!---------------
$!
$!
$! TCPIP$SMTP_MTS_ALLIN1
$! Used in older versions of TCP/IP Services. When relaying mail
$! from the SMTP environment to MTS (the message router), the
$! symbiont puts TCPIP$SMTP into the From: field. Otherwise, older
$! versions of MR/MRGATE send the mail back with a Return path too
$! complicated error. No longer needed if you are running MR and
$! MRGATE Versions 3.3A.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_MTS_ALLIN1 1
$!
$!---------------
$!
$!
$! TCPIP$SMTP_POSTMASTER_ALIAS user-name
$! Enables mail bounced by the local host to appear to be from a
$! user name other than TCPIP$SMTP@node.domain. Specify the user
$! name portion of the address, not including the host name. For
$! example:
$!
$!DEFINE/SYSTEM TCPIP$SMTP_POSTMASTER_ALIAS "Postmaster"
$!
$!---------------
$!
$! TCPIP$SMTP_REWRITE_MTS_FROM
$! If you have most or all of your users' mail forwarded to
$! ALL-IN-1, use this logical name to instruct the symbiont to parse
$! the user name out of the complex MTS address and append the local
$! host name instead. As a result, only a simple address is sent to
$! the Internet and any replies are relayed correctly to MTS.
$!
$!---------------
$!
$! TCPIP$SMTP_ALTGATE_ALWAYS
$! Instructs the symbiont to send all mail that is destined for
$! another system (nonlocal mail) to the alternate gateway. Zone
$! check is not performed.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_ALTGATE_ALWAYS 1
$!
$!---------------
$!
$! TCPIP$SMTP_MX_IF_NOALTGATE
$! Instructs the symbiont to use MX records to connect to a host if
$! the alternate gateway cannot be reached.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_MX_IF_NOALTGATE 1
$!
$!---------------
$!
$! TCPIP$SMTP_NO_MX
$! Instructs the SMTP symbiont not to use MX records to route mail.
$! Attempts to translate the domain part of each SMTP address into a
$! host name and send the mail directly to that address. If the host
$! name does not translate to an address, the mail is returned. If
$! the host is not available, the mail is queued again.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_NO_MX 1
$!
$!---------------
$!
$!
$! TCPIP$SMTP_LOCAL_ALIAS_ONLY
$! Instructs the SMTP symbiont to use only the contents of the local
$! alias file for determining whether a mail message is local.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_LOCAL_ALIAS_ONLY
$!
$!---------------
$!
$!
$! TCPIP$SMTP_PROHIBIT_USER_HEADERS
$!
$! Disables outbound alias processing. This prevents the use of the
$! TCPIP$SMTP_FROM logical.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_PROHIBIT_USER_HEADERS 1
$!
$!---------------
$!
$! TCPIP$SMTP_SFF_REQUIRES_PRIV
$! This Boolean logical, if defined, requires users to set either
$! SYSPRV, BYPASS or OPER privileges before using the Send From File
$! (SFF) feature.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_SFF_REQUIRES_PRIV 1
$!
$!---------------
$!
$! TCPIP$SMTP_MIME_HACK
$! When set, SMTP accepts 8BITMIME requests from SMTP clients,
$! preventing the clients from converting the message into a 7-bit
$! format.
$!
$!DEFINE/SYSTEM TCPIP$SMTP_MIME_HACK 1
$!
$!---------------
$!
$! TCPIP$SMTP_SUPPRESS_VERSION_INFO
$! Tells the SMTP software not to reveal TCP/IP Services or OpenVMS
$! version information
$!
$!DEFINE /SYSTEM TCPIP$SMTP_SUPPRESS_VERSION_INFO
$!
$!---------------
$!
$! TCPIP$SMTP_FROM <domain name>
$! This is a logical individual users can define at the process level
$! to override the domain name used in the From: and reply-to: Fields
$!
$!
$!***********************************************************
$!
$! Prepared by Jean-François Mezei,
$! Vaxination informatque
$! Montréal, Canada
$! vaxination@videotron.ca
$!
$! from text in the [Digital] TCPIP Services Management reference manual
$!and release notes from TCPIP 5.3
$!
Code: Select all
SYS$SYSDEVICE:[SYS0.TCPIP$SMTP]TCPIP$SMTP.CONF
Code: Select all
Relay : FALSE
Code: Select all
Relay : TRUE
Code: Select all
@sys$manager:tcpip$smtp_shutdown
@sys$manager:tcpip$smtp_startup